Showing posts with label Finance 4. Show all posts
Showing posts with label Finance 4. Show all posts

Wednesday, 7 September 2011

Discriminant Function

The purpose of a discriminant function analysis is to predict group membership based on a linear combination of the interval variables. The procedure begins with a set of observations where both group membership and the values of the interval variables are known. The end result of the procedure is a model that allows prediction of group membership when only the interval variables are known. Another purpose of discriminant function analysis is an understanding of the data set, as a careful examination of the prediction model that results from the procedure can give insight into the relationship between group membership and the variables used to predict group membership.
Discriminant analysis is used when:
• The dependent is categorical with the predictor IV’s at interval level such as age, income, attitudes, perceptions, and years of education, although dummy variables can be used as predictors as in multiple regression. Logistic regression IV’s can be of any level of measurement.
• There are more than two DV categories, unlike logistic regression, which is limited to a dichotomous dependent variable.
Discriminant analysis involves the determination of a linear equation like regression that will predict which group the case belongs to. The form of the equation or function is:
D=v1XI + v2X2 + v3X3.....
=viXi + a
Where D = discriminate function
v = the discriminant coefficient or weight for that variable
X = respondent’s score for that variable
a = a constant
i = the number of predictor variables
Purpose of Discriminant analysis:
• To investigate differences between groups on the basis of the attributes of the cases, indicating which attributes contribute most to group separation. The descriptive technique successively identifies the linear combination of attributes known as canonical discriminant functions (equations) which contribute maximally to group separation.
• Predictive DA addresses the question of how to assign new cases to groups. The DA function uses a person’s scores on the predictor variables to predict the category to which the individual belongs.
• To determine the most parsimonious way to distinguish between groups.
• To classify cases into groups. Statistical significance tests using chi square enable you to see how well the function separates the groups.
• To test theory whether cases are classified as predicted
The aim of the statistical analysis in DA is to combine (weight) the variable scores in some way so that a single new composite variable, the discriminant score, is produced.

Posted by
Amit Kulkarni
Finance


Learnings from Business Analytics

Business Analytics focuses on identifying the changes to an organization that are required to achieve strategic goals.These include changes in strategy , structure, processes , policy and information system.

It focuses on understanding the needs of the business as a whole , its strategic direction and identifying initiative that will help make those strategies into goals.

It includes creating and maintaining business architecture , feasibility studies , identifying new business opportunities, preparing business case and conducting the initial risk assessment.
Here I try to sum up what I have learnt till now in the BA course.


Factor analysis
Factor analysis is a collection of methods used to examine how constructs influence the responses on a number of measured variables.
Measures that are highly correlated are likely influenced by the same factors while measures that are not highly correlated are likely uninfluenced by different factors.
Factor analysis has its application in various fields like economics (to get important factors which affect the economy) , Behavioural Analysis(What are the important factors impacting the human
Behaviour), Marketing(What are the major factors impacting the decision of a consumer to select a specific brand.
It can also be used in market research. Market research data can be factored to understand the results more clearly.

Discriminant Analysis:

It is most often used to help a researcher predict the group in which a subject belongs.
The predictor variable needs to be ordinal or scale, which helps us analyze the effect of such variables on our hypothesis. The most famous application of this method is bankruptcy prediction where Altman z score is used which tells us whether a firm will survive or not.

Conjoint Analysis:

It applies a complex form of analysis of variance to the data obtained from each respondent.
Then it calculates the value for each feature. Features with the highest value are judged the most important to respondents. It tries to identify the interdependency existing between a no. of variables.

It can be used to investigate the attributes that influence individual investors decision making process to buy shares. It also tells us how people make choices between products or services, so that companies can design new products or service meeting customer needs.

Cluster Analysis:

K-means clustering:
It is an algorithm for clustering data that allows the user to choose the number of clusters one would like to have from a given set , based on some similarity.
With a large data set K-means is faster than hierarchical clustering. Data reduction is accomplished by replacing the co-ordinates of each point on a cluster with the cluster’s centroid.
K-means can be helpful for a bank , which is looking at analysing customers in the corporate world on who to target and how much loan to offer to which kind of customers. K-means clustering can be used to find the ideal company with the best risk –return profile using the ratios( like cash , inventory turnover, ROE, ROA) and then cluster of companies around the ideal company can be created. All the companies in that cluster can then be suitable for the bank.

Hierarchical clustering:
Hierarchical clustering is nothing but grouping of data on various scales. Usually a cluster tree is created , which is also known as a dendrogram. In dendrograms, the first step is to find which elements should be merged in a cluster. For the same purpose, two elements which are closest are taken and the same process gets repeated.

Posted by
Neeraj Singh
Finance

Monday, 5 September 2011

The lesser used coefficient- Kendall’s Tau


All of our knowledge of correlation coefficients so far has been limited to the Pearson’s correlation coefficient- the much used and analyzed and commented upon ‘R’. However, when going through the output of one of the exercises done in class, I came across a never before read about co-efficient- the Kendall’s Tau. So my ‘googling’ skills in tow, I have set out to figure out what this new animal is.

The Kendall’s Tau is a measure of rank correlation: that is, the similarity of the orderings of the data when ranked by each of the quantities. A non- parametric coefficient, it is an alternative to Spearman’s correlation coefficient and is much easier to interpret.

Although the actual calculation is a bit arduous and needs more than just googling abilities to figure out, the interpretation of this coefficient is done as below:

The Kendall tau correlation represents the difference between two probabilities – say that Sonia and Manmohan are raters, who are rating some object on some characteristic. Sonia says that A has a higher score than B. The tau-a correlation is the probability that Manmohan will say that they are in the same order minus the probability that he will say that they are in the opposite order. If the two are in complete agreement, this will be 1 – 0 = 1. If they are in complete disagreement, this will be 0 – 1 = -1, and if both Sonia and Manmohan are random, this will be 0.5 – 0.5 = 0.

The main advantages of using Kendall's tau are that the distribution of this statistic has slightly better statistical properties. However, the difficulty in its computation makes t a lesser used correlation coefficient.


Posted by
Jyoti Maheshwari
Finance

Conjoint Analysis: Asking indirect questions to get direct answers!!

In this competitive market, a company cannot capture its market with random and haphazard pricing strategy decisions. The winning firm will be the one which develops and prices its products, especially those with new features, according to market demand after scientifically collecting data from target customers like conjoint analysis in spss.
But the direct survey question "how much would you pay for a particular mobile?" is unreliable and misleading. So instead, we have to ask the consumer's opinion on a series of similar products with differing features over a range of prices.
In order to carry out this survey, we can take the help of spss conjoint function. After the data has been collected from the respondents, we generate orthogonal design, which then use regression analysis to compute mathematical values that explain consumer behaviour - how much value is placed on price, or location, or features, etc. and then correlate this data to demographic, lifestyle, or other consumer profiles.
As a result of conjoint, the current product offerings or price can be tweaked to match consumer behaviour and expectations. Also, vulnerabilities - like weak brand or uncompetitive prices - can be exposed with conjoint analysis.
Conjoint Method
To start with, we select what attributes of the product we would like to test, and what are the possibilities within each attribute. To demonstrate, let's use the example of a mobile, about which we want to know consumer attitudes about:
Price, memory, camera, weight, SMS, alarm, download, internet, Bluetooth etc.
Once the features have been shortlisted, then various options within each attribute need to be decided.
Then the customers are supported to be asked various indirect questions to know their opinion about various features because direct questions could be misleading. Then the answers are fed in the software which computes a mathematical regression to tell us how important each of the factors is to the individual responding consumer, and to the group of responding consumers as a whole. In addition, each consumer will be asked a number of informational questions to create a demographic profile, so that we can compare the results and analyze them based upon income, age, location, and other variables that may affect consumer behaviour towards a particular product.
The end result of this technique is a quantitative, robust analysis of what consumers really want, with each attribute evaluated in the context of the others, incorporating the trade-offs that ultimately project the greatest influence on consumer behaviour.

Posted by
Malvika Rai
Finance


Sunday, 4 September 2011

A beginner’s insight into Regression Analysis in SPSS. (Data – Regression – ….)

“Minds are like parachutes - they only function when open.”
- Thomas Dewar

Logistic Regression
Logistic regression is useful for situations in which you want to be able to predict the presence or absence of a characteristic or outcome based on values of a set of predictor variables. It is similar to a linear regression model but is suited to models where the dependent variable is dichotomous. Logistic regression coefficients can be used to estimate odds ratios for each of the independent variables in the model. Logistic regression is applicable to a broader range of research situations than discriminant analysis.
Logistic Regression provides the following unique features:
Hosmer-Lemeshow test of goodness of fit for the model.
Stepwise analyses.
Contrasts to define model parameterization.
Alternative cut points for classification.
Classification plots.
Model fitted on one set of cases to a held-out set of cases.
Saves predictions, residuals, and influence statistics.

Multinomial Logistic Regression
Multinomial Logistic Regression is useful for situations in which you want to be able to classify subjects based on values of a set of predictor variables. This type of regression is similar to logistic regression, but it is more general because the dependent variable is not restricted to two categories.
Multinomial Logistic Regression provides the following unique features:
Pearson and deviance chi-square tests for goodness of fit of the model.
Specification of subpopulations for grouping of data for goodness-of-fit tests.
Listing of counts, predicted counts, and residuals by subpopulations.
Correction of variance estimates for over-dispersion.
Covariance matrix of the parameter estimates.
Tests of linear combinations of parameters.
Explicit specification of nested models.
Fit 1-1 matched conditional logistic regression models using differenced variables.

PROBIT Analysis
This procedure measures the relationship between the strength of a stimulus and the proportion of cases exhibiting a certain response to the stimulus. It is useful for situations where you have a dichotomous output that is thought to be influenced or caused by levels of some independent variable(s) and is particularly well suited to experimental data. This procedure will allow you to estimate the strength of a stimulus required to induce a certain proportion of responses, such as the median effective dose.
PROBIT Command Additional Features: The command syntax language also allows you to:
Request an analysis on both the probit and logit models.
Control the treatment of missing values.
Transform the covariates by bases other than base 10 or natural log.

Nonlinear Regression
Nonlinear regression is a method of finding a nonlinear model of the relationship between the dependent variable and a set of independent variables. Unlike traditional linear regression, which is restricted to estimating linear models, nonlinear regression can estimate models with arbitrary relationships between independent and dependent variables. This is accomplished using iterative estimation algorithms. Note that this procedure is not necessary for simple polynomial models of the form Y = A + BX**2. By defining W = X**2, we get a simple linear model, Y = A + BW, which can be estimated using traditional methods such as the Linear Regression procedure.
Conditional Logic (Nonlinear Regression): You can specify a segmented model using conditional logic. To use conditional logic within a model expression or a loss function, you form the sum of a series of terms, one for each condition. Each term consists of a logical expression (in parentheses) multiplied by the expression that should result when that logical expression is true.

Weight Estimation
Standard linear regression models assume that variance is constant within the population under study. When this is not the case—for example, when cases that are high on some attribute show more variability than cases that are low on that attribute—linear regression using ordinary least squares (OLS) no longer provides optimal model estimates. If the differences in variability can be predicted from another variable, the Weight Estimation procedure can compute the coefficients of a linear regression model using weighted least squares (WLS), such that the more precise observations (that is, those with less variability) are given greater weight in determining the regression coefficients. The Weight Estimation procedure tests a range of weight transformations & indicates which will give the best fit to the data.
WLS Command Additional Features: The command syntax language also allows you to:
Provide a single value for the power.
Specify a list of power values, or mix a range of values with a list of values for the power.

Two-Stage Least-Squares Regression
Standard linear regression models assume that errors in the dependent variable are uncorrelated with the independent variable(s). When this is not the case (for example, when relationships between variables are bidirectional), linear regression using ordinary least squares (OLS) no longer provides optimal model estimates. Two-stage least-squares regression uses instrumental variables that are uncorrelated with the error terms to compute estimated values of the problematic predictor(s) (the first stage), & then uses those computed values to estimate a linear regression model of the dependent variable (the second stage). Since the computed values are based on variables that are uncorrelated with the errors, the results of the two-stage model are optimal.
2SLS Command Additional Features: The command syntax language also allows you to estimate multiple equations simultaneously.

Categorical Variable Coding Schemes
In many procedures, you can request automatic replacement of a categorical independent variable with a set of contrast variables, which will then be entered or removed from an equation as a block. You can specify how the set of contrast variables is to be coded, usually on the CONTRAST subcommand. This appendix explains & illustrates how different contrast types requested on CONTRAST actually work.

References:
http://www.helsinki.fi/~komulain/Tilastokirjat/IBM-SPSS-Spec-Regression.pdf

Posted by
Saurabh Gupta
Finance

Conjoint Analysis

Conjoint Analysis is a popular marketing research technique that marketers use to determine what features a new product should have and how it should be priced. Conjoint analysis became popular because it was a far less expensive and more flexible way to address these issues than the regular concept testing.
Simple Example:
Suppose we want to market a new golf ball. We know that there are three important product features:

Average Driving Distance
Average Ball Life
Price

We further know that there is a range of feasible alternatives for each of these features, for instance:


Average Driving Distance Average Ball Life Price

275 yards 54 holes Rs 100

250 yards 36 holes Rs 250

225 yards 18 holes Rs 500

Obviously, the market’s “ideal” ball would be:

Average Driving Distance Average Ball Life Price

275 yards 54 holes Rs 100

However, the “ideal” ball from the manufacturing perspective would be:

Average Driving Distance Average Ball Life Price

225 yards 18 holes Rs 500

assuming that it costs less to produce a ball that travels a shorter distance and has a shorter life.

Here’s the basic marketing issue: We’d lose all our profits selling the first ball and the market wouldn’t buy the second. The most viable product is somewhere in between, but where?

Conjoint analysis lets us find out where.

We first provide the rankings for distance and ball life as shown:

Rank Average Driving Distance Rank Average Ball Life

1 275 yards 1 54 holes
2 250 yards 2 36 holes
3 225 yards 3 18 holes

Depending upon the rankings given to each of the different attributes, we can calculate the total utility that a buyer can derive from a ball that has those attributes. Thus a rational buyer would be one who would seek to maximize his utility. Same goes for the person who is responsible for manufacturing the golf ball. He would manufacture one which maximizes his utility. Also, a buyer (or manufacturer) will also calculate the utility difference between the various options that are available to him. This gives him a fair idea as to what is he sacrificing, to get the other.

These steps form the basics of conjoint analysis. Although trade-off matrices are useful for explaining conjoint analysis as in this example, not many researchers use them nowadays. It’s easier to collect conjoint data by having respondents rank or rate concept statements or by using PC-based interviewing software that decides what questions to ask each respondent, based on his previous answers.

As you may expect there is more to applying conjoint analysis than is presented here. But if you understand this example, you understand what conjoint analysis is and what it can do for you as a marketer.

Posted by
Saurabh Agarwal
Finance

Thursday, 1 September 2011

GAPMINDER....Make sense of the world with fun


Gapminder is a tool that allows the user to present a huge amount of world data visually in the form of moving, interactive graphs.Gapminder takes a stream of data dependent on time, and presents it visually, in the form of moving graphs. The strength of this tool is the data it gives access to. a staggering amount of worldwide data, from geographical disasters and national economy, to personal poverty and AIDS.

The data covered in Gapminder is worldwide. The data is displayed on a graph, with variables shown on the x-axis and y-axis with size and colour variations to depict magnitude and categories. The graph can compare multiple sets of data at one time, over a period of years which facilitates easy comparison. Sections of a graph can be zoomed in on, and the path of individual points can be followed, to emphasize specific data when needed. The Gapminder data can even be displayed over a map, so that statistical changes can be shown geographically.

Some of the projects undertaken by Gapminder are described below.

World Income Distribution is an interactive display of statistics on household income distribution for Bangladesh, Brazil, China, India, Indonesia, Japan, Nigeria, Pakistan and USA and the World as a whole in each year from 1970 to 1998.

Dollar Street is an interactive display of the world in the form of a street. The street number depicts the daily income per person in the family. All people of the world live on Dollar Street. The poorest live on the left end and the richest on the extreme right end. All other people live in between on a continuous scale of daily incomes.

Human Development Trends 2003 is a linear thematic Flash presentation is developed with United Nations Development Program (UNDP) for the release of the Human Development Report 200.

World Health Chart 2001 is a display of 50 to 100 years of health development for all countries of the World with time series for 35 indicators provided by the World Health Organization.

Posted by

Swati Agarwal

Finance


ANALYSIS OF FACTORS AFFECTING ECOMMERCE IN BANKS THROUGH DISCRIMINANT ANALYSIS




The objective of discriminant analysis in such scenarios is to understand the group differences and to predict the likelihood that an entity that will distinguish adopters and non-adopters of ecommerce based on their perception of the complexity involved in using ecommerce.

Discriminant analysis involves deriving a variate; in this case the variate is a linear combination of nine independent variables –

v Perceived complexity

v Perceived benefits

v Organizational competence

v Perceived compatibility

v Supporting industries e-readiness

v Top management support

v Market e-readiness

v IT capability

Government e-readiness that was used to discriminate between adopters and non-adopters of ecommerce. Discrimination is achieved by setting the variate’s weight for each variable to maximize the between-group variance relative to the within group variance.

The two groups (adopters/non-adopters) of this research are independent in the sense that they are separate samples containing different sets of individual subjects.

The group variable is adoption of ecommerce. The independent variable is Management support. It discriminates between adopters and non-adopters of ecommerce. Moreover, the adopters of ecommerce had greater support from management.

All the items within this variable were significant discriminators. The mean value for adopters was significantly larger than the mean value for non-adopters. This is consistent with assertion that top management support is crucial in the acquisition and diffusion of innovation.

A number of conclusions can be drawn from these results. Firstly, banks with a strong support and commitment to ecommerce from top management are more likely to adopt ecommerce. Secondly, banks that have the requisite IT and business resources (infrastructure and skills) for ecommerce adoption stand a better chance at adopting ecommerce. Thirdly, banks that have sound IT infrastructure in place are in a better position to adopt ecommerce.

Posted by

Neha Sharma

Finance

Wednesday, 31 August 2011

Of faulty assumptions and more

Rationality and normal distribution of factors are the two assumptions that underlie most theories in finance. The most frequently quoted but unrealistic, may I add!!

So I came across this technique that uses discriminant analysis to predict the failure of a bank. And if the two assumptions mentioned above were actually true, we would have beaten the financial crisis hands down and saved the financial giants from going down in the dumps. Having said that though, this technique is at least worth discussing.

Firms are divided into failing and non-failing firms and each is given a ‘discriminant score’. The technique works as follows:
Discriminant analysis is used to derive a linear combination of two or more independent variables that best discriminate the two groups under consideration, failing and non-failing companies. The discriminant analysis derives a linear combination from the following equation

Z = w1x1+ w2x2+...+wnxn
Where

Z = discriminant score
wi (i=1, 2, ... ,n) = discriminant weights
xi (i=1, 2, ... ,n ) = independent variables, that are various financial ratios in this case

The discriminant score given to each firm is then compared to a cut-off score to determine which group the company in question belongs to (failing or non- failing firm).

Now, in the perfect world where everything followed the ‘norm’, discriminant analysis would have worked perfectly given that the variables in every group followed a normal distribution and the covariance matrices for every group were equal. However, past experiments have revealed that firms and more often than not, failing firms, often violate this condition. So an aberration from the assumption is more of a norm than just an exception.

However, being the ‘bean counters’ that we finance guys are accused of being, a favourable discriminant score should make for a good enough premise for us to declare a firm failing or non- failing. No room for faulty assumptions there!

Reference : Paper titled ‘Choosing Bankruptcy predictors,using Discriminant Analysis, Logit Analysis and Genetic Algorithms’ by the Turku Centre for Computer Science

Posted by
Jyoti Maheshwari
Finance

Using discriminant analysis to prevent bankruptcy

Earlier Ratio Analysis was used as an analytical technique to measure the performance of the companies. The performance of the companies, as measured by the ratios , such as profitability, liquidity and solvency prevailed as the most significant indicator but the order of their importance is not being clear , since in each and every case taken ,some different ratio came out as the most important factor and sometimes it might seem to be confusing , for instance, a firm with a poor profitability / solvency record may be regarded as potentially bankrupt.

Discriminant Analysis is a technique , which has been applied nowadays successfully to financial problems such as credit evaluation (as had been illustrated in class) and investment analysis. It is a parametric technique to determine , which weightings of quantitative variables or predictors best discriminate between 2 or more than 2 groups of cases. Analysis creates a discriminant function , which is a linear combination of the weightings and scores on these variables. The maximum no. Of functions is either the no. Of predictors or the no. of groups minus one , whichever of these two values is the smaller.

Z =a+W1*X1+W2*X2+.......+Wn*Xn

Where Zjk = Z score of discriminate function

a= intercept

Wi=Discriminant coefficient for the independent variable i

Xi =independent variable i

In a 2 group discriminant function, cutting score is used to classify he two groups uniquely. Optimal cutting score is halfway between the centroid of two groups.

The primary goal is to find dimensions that groups differ on and ,create classification functions , then we need to find along how many dimensions do groups differ reliably.

By discriminant analysis , we can find which ratios are affecting the performance of a company .

Z= a*X1+b*X2+c*X3+....+n*Xn

Where Xis can be working capital / total assets, retained earnings / total assets, EBIT/total assets, B/E value, sales/ total assets etc.

It can then be applied to similar other companies.

We use discriminant analysis in evaluating consumer loan application. A fast and efficient device for detecting unfavourable credit risks might avoid the loan officer to avoid disastrous decisions. Thus it can be thought of as a potential weapon to be used in business sector.


Posted by

Neeraj Kumar Singh

Finance

Tuesday, 30 August 2011

Perceptual Mapping

In today's class we learnt the concept of perceptual mapping

Perceptual mapping can be used to plot the interrelationships of variables among different clusters .Variables are rated on a range of attributes and are then mapped to show their relative positions. Perceptual maps are generally used for market segmentation and involve two steps of data collection and data analysis.Perceptual mapping allows the management to take a broad view of the strength and weakness of their products or service offerings relative to their competition. Also called the Multi Dimensional Scaling,

After plotting the perceptual maps for various attributes a 1st level analysis would throw up aspects that were ignored in the past.

Today's sessions also revolved around the interusage of SPSS and Permap and the analysis of various parameters thrown up by a customer satisfaction survey regarding a few stores.

For finance matters this technique is helpful in corelating the various behaviours of stocks and in determining the crucial factors involved in the price fluctuation of stocks.

Our Group measured the customer satisfaction between the four stores depending on the distance of the stores and the six attribute such as price satisfaction,variety satisfaction,organization satifaction,service satisfaction,item quality satisfaction,overall satisfaction.Then the frequency was calculated for the price satifaction and overall satifaction attributes . then the various parameters such as method of payment , variety satisfaction,item quality satisfaction , shopping frequency calculation,price satisfaction .

In al the above tests the null hypothesis was assumed as that there is no corelation between the distance of the store with the above mentioned variables.

According to the chi square results the null hypothesis was accepted in all the cases except for shopping frequency and variety satisfaction case.

From our set of data, we learnt that the closer the store, higher the price satisfaction. Through this one can infer that a customer wouldn’t mind paying a little extra, for the convenience of proximity that a store nearby gives him. Another finding showed that, for quality, people do not mind travelling that extra distance.


Posted by

Amit Kulkarni

Finance

PERCEPTUAL MAPPING: Segmentation, Targeting & Positioning

Perceptual mapping represents a geometric comparison of how competing products are perceived. One thing to note is that the closer products/brands are clustered together on a perceptual map, the greater the competition. The further apart the positions, the greater the opportunity for new brands to enter the market, simply because the competition is less intense.

Determining attribute importance and mapping the product across some attributes, we can discover how our brand and competing brands are perceived in the marketplace. Perceptual mapping can provide significant insight into how a market operates. For example, it provides marketers with an insight into how their brands are perceived and it also provides a view about how their competitors’ brands are perceived. In addition to this substitute products can be uncovered, based on their closeness to each other. All of the data reveal strengths and weaknesses that in turn can assist strategic decisions about how to differentiate on the attributes that matter to customers and how to compete more effectively in the target market.

Positioning Strategies

Understanding how products are positioned provides important inputs not only to the way a product performs but also to the marketing communications used to support a product. Through communications, and especially advertising, information can be conveyed about each attribute and in doing so adjust the perceptions customers have of the product.

Marketing communications can be used in one of two main ways to position a product, namely to position a brand either functionally or expressively (symbolically). Functionally positioned brands emphasize the features and benefits, whilst expressive brands emphasize the ego, social, and hedonic satisfactions that a brand can bring. Both approaches make a promise: with regard to, for example, hair care, a promise to deliver cleaner, shinier, and healthier hair (functional) or hair that we are confident to wear because we want to be seen and admired, or because it is important that we feel more self-assured (expressive).

Repositioning Strategies

Markets change and some change quickly. Technology, customer tastes, and competitors’ new products are some of the reasons for these changes. If the position adopted by a brand is strong, if it was the first to claim the position and the position is being continually reinforced with clear, simple messages, then there may be little need to alter the position originally adopted. However, most

marketers need to be alert and be prepared to reposition their brands as the relative positions occupied by brands, in the minds of customers, will be challenged and shifted around on a frequent basis. However, repositioning is difficult to accomplish, often because of the entrenched perceptions and attitudes held by buyers towards brands and the vast (media) resources required to make the changes.

Repositioning is essentially a task that revolves around the product and the way it is communicated. There are four main ways to approach repositioning a product. The choice of approach depends on each individual situation facing a brand. In some cases the brand needs to be adapted before re launch.

• Change the tangible attributes and then communicate the new product to the same market.

• Change the target market and deliver the same product.

• Change both the product (attributes) and the target market.

Posted by

Malvika Rai

Finance

Monday, 29 August 2011

A Layman’s understanding of SELECTING CASES in Data


Sometimes a researcher may wish to restrict an analysis to only a subset of the data file. For example, a researcher might want to do an analysis on only the female participants, only on American citizens, or only on those who disagreed with a presented message. You can have SPSS only perform analyses on a subset of cases meeting specified criteria by selecting cases.

For example, suppose you believed that an experimental manipulation would work better on female participants. You might therefore want to do an analysis only on the female participants. Assuming that you had a variable named “gender” in your data set where men had a value of 1 & women had a value of 2, you could select only women for analysis in SPSS by taking the following steps:

ü Choose Data Select Cases.

ü Click the radio button next to If condition is satisfied.

ü Click the If button.

ü Type gender=2 in the popup window. (Type through the buttons provided there. That would automatically adjust for required spaces).

ü Click the Continue button.

ü Click the OK button.

After running this procedure, the dataset will have slashes crossing out the cases that are excluded (in this case, it should cross out all the male participants). Any further analyses on this data set (until you issue another Select Cases command or load another data set) will be performed solely on the female participants.

An analyst can restrict the data set in more complicated ways by using the Boolean operator AND (represented by the symbol &) or the Boolean operator OR (represented by the symbol |). The & symbol tells SPSS that a case has to meet two specific criteria to be included in the analysis, while the | symbol tells SPSS that it should include a case if it meets either of two criteria. As an example, let us assume that the data set included a variable named class where 1 = freshmen, 2 = sophomore, 3 = junior & 4 = senior. If we only wanted to include cases that represented female juniors we would perform the following steps.

ü Choose Data Select Cases.

ü Click the radio button next to If condition is satisfied.

ü Click the If button.

ü Type (gender=2) & (class=3) in the popup window.

ü Click the Continue button.

ü Click the OK button.

If we wanted to include cases that were either female or juniors (so that the analysis would include all females and any males who happened to be juniors) we would take the following steps.

ü Choose Data Select Cases.

ü Click the radio button next to If condition is satisfied.

ü Click the If button.

ü Type (gender=2) | (class=3) in the popup window. Click the Continue button.

ü Click the OK button.

You may notice that one of the buttons on the selection keypad looks like “~=”. This symbol stands for “not equal to”. Sometimes it is easier to identify what cases to exclude than it is to identify what cases to include. For example, you could select everyone in the data set except sophomores by taking the following steps:

ü Choose Data Select Cases.

ü Click the radio button next to If condition is satisfied.

ü Click the If button.

ü Type class~=2 in the popup window.

ü Click the Continue button.

ü Click the OK button.




Posted by

Saurabh Gupta
Finance

Sunday, 28 August 2011

Identification of false financial statements through SPSS

An external stakeholder can determine whether a financial statement is falsified before using such a financial statement as a base for investing, appraising, and taking other decisions.

There has been a research paper presented in the American University of Nigeria, which testified the efficacy of ‘CPT Analyses’ model for identifying false financial statements using SPSS. The paper demonstrate that conducting and implementing the proposed ‘CPT’Analysesor detection of false financial statements will, undoubtedly be helpful to professionals such asauditors, forensic accountants, insolvency practitioners, tax authorities, investors, consultants, banksand other users of financial statements.

SPSS help organizations succeed in combating fraud, waste, and abuse. For example, our solutions enable organizations to:

Another major field of contribution is the health care sector, where deliberately submitting false claims to private health insurance plans or tax-funded insurance programs such as Medicare or Medicaid, is a serious and growing nationwide crime trend.

Likewise, there can be many other areas where SPSS can serve in and help the processes become smother.

http://www.sybase.com/content/1025531/iws_fraud_l02341.pdf

http://www.spss.com.sg/software_and_solutions.aspx?pageid=337&secid=300

Posted by

Swati Agarwal

Finance